Whole Home Backup

The Wirentech WP51314 16kWh wall-mounted battery pairs with a 12kW hybrid inverter for outage backup, solar self-use, off-grid power and demanding household loads.

Wirentech WP51314 16kWh battery and 12kW hybrid inverter installed as a whole home backup system.

Power, Energy, Bypass

Compare the system’s 12kW simultaneous load capacity, 16kWh stored energy and 200A grid-bypass path for accurate backup planning.

Diagram comparing 12kW power, 16kWh battery energy and the inverter’s 200A grid-bypass path.

Large Load Priorities

The 12kW inverter supports demanding 120/240V circuits, including home essentials, central HVAC, well pumps and selected EV or 240V loads.

Backup load examples including home essentials, central HVAC, well systems, EV charging and 240V appliances.

Understanding 200A Bypass

The 200A rating applies to grid power passing through the inverter and does not increase battery capacity, inverter output or outage runtime.

Diagram showing grid power passing through a 200A inverter bypass path to backed-up household loads.

Heavy Load Runtime

Estimated runtime ranges show how quickly the WP51314 16kWh battery discharges under 0.75kW, 3kW, 6kW and 10kW loads.

Estimated WP51314 16kWh battery runtime at four different household power loads.

Output, Surge, Transfer

The hybrid inverter delivers 12kW continuous output, up to 18kVA peak power, typical 10ms transfer and motor-starting support up to 6HP.

Flexible Energy Sources

The hybrid platform coordinates dual-MPPT solar input, grid bypass, generator input, battery storage and household loads during daily use and outages.

Smart BMS Protection

The 51.2V 314Ah WP51314 battery provides 16kWh capacity, up to 300A charge and discharge capability, CAN and RS485 communication, and integrated BMS monitoring.

Professional Installation Planning

Plan verified structural support and code-compliant clearances for the 286.6-pound wall battery and 82.7-pound wall-mounted hybrid inverter.

FAQs

Can it back up an entire home?

The system can support selected home essentials and demanding 120/240V loads. Actual whole-home coverage depends on simultaneous power demand, appliance starting surge and how the backup circuits are configured.

How much power does it provide?

The WP51314 battery provides 16kWh of nominal stored energy. The hybrid inverter delivers 12kW of continuous output and up to 18kVA of peak power.

What does 200A bypass mean?

The 200A rating applies to utility power passing through the inverter to backed-up loads. It does not increase battery capacity, battery-mode output or outage runtime.

How long will the battery run?

Runtime depends on the connected load. Planning estimates range from approximately 15.6-17.5 hours at 0.75kW to 1.2-1.3 hours at 10kW. Actual runtime varies with system settings, efficiency, reserve and operating conditions.

Does it include a smart BMS?

Yes. The integrated BMS monitors voltage, current, temperature and cell balance while providing overcharge, over-discharge, overcurrent and short-circuit protection.

Is professional installation required?

Yes. The wall-mounted battery and inverter require verified structural support, suitable clearances and code-compliant electrical installation. The system includes a 10-year battery limited warranty and a 5-year inverter limited warranty; terms apply.